Serving the Seattle area  ·  (425) 648-6332  ·  Open Mon-Sun 7am-7pm
📞 (425) 648-6332 Free Quote

Metal Roofing in Bainbridge Island, WA (98110) · Local Professionals

Seattle Metal Roofing · Fast response in Bainbridge Island and the Seattle area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Bainbridge Island is a place where tall Douglas firs and western red cedars crowd the lots, and the moss moves in fast on anything shaded. Homes here range from early 1900s farmhouses near Winslow to 1970s ramblers tucked into the woods off Fletcher Bay Road, plus newer builds with standing seam roofs that face the wind coming off Puget Sound. The mix of steep driveways, tight tree canopy, and salt air means your roof takes a beating that flatland suburbs never see.

We started Seattle Metal Roofing in 2009, and we have worked on Bainbridge Island long enough to know that a roof here has to handle fir limbs, moss, and the kind of wind that peels back a loose ridge cap. If you are near the ferry terminal or out toward Manzanita, we can get a free inspection scheduled and tell you straight what your roof needs.

Metal Roofing in Bainbridge Island (98110)

The terrain on Bainbridge is what makes roofing here different. Many properties sit on a slope, with the house tucked into the trees and the roofline partly shaded all day. That shade keeps moss and algae growing on asphalt shingles, and it also means we are often working with limited access for ladders and materials. Lots near the water catch more wind, and we regularly see lifted trim, loose fasteners, and panels that have shifted after a winter storm. Fir limbs are a real threat, and a punctured panel or a cracked shingle from a falling branch is one of the most common calls we get. We handle metal shingle roofing and storm damage repair with crews who are used to working around big trees and steep grades.

We have served Bainbridge Island and the greater Seattle area since 2009, and we are a Metal Roofing Alliance member. Our team is fully insured with general liability and workers' compensation, so you are covered when we are on your property.

Our services in Bainbridge Island

How a Job Works in Bainbridge Island

Step 1: You call us at (425) 648-6332 or send a request, and we set up a free on-site assessment. We look at the roof, the flashing, the gutters, and the tree cover, and we give you a written estimate with options. If it is a repair, we tell you if a patch will hold or if replacement makes more sense.

Step 2: Once you approve, we schedule the work and handle the permit paperwork with the City of Bainbridge Island. We know that island access and ferry traffic can affect delivery times, so we plan material drops around your driveway and any HOA or neighborhood rules. For a full replacement, we protect your landscaping and keep the site as tight as the lot allows.

Step 3: When the job is done, we walk the property with you, clean up every nail and scrap, and make sure the gutters and downspouts are clear. We do not leave until you have seen the finished work and know what to expect for maintenance.

Pricing on Bainbridge Island depends on the size and pitch of your roof, how easy it is to access, the condition of the existing roof, and how soon you need it done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot, and corrugated panel roofing starts at $5.50 per square foot. Repairs and leak repairs start at $450, screw replacement and re-fastening starts at $750, and flashing, chimney, or skylight work starts at $600. We give free estimates, so call (425) 648-6332 and we will put real numbers together for your house.

✅ Metal Roofing Alliance Member, licensed and insured for work in Bainbridge Island and nearby areas.

My house is surrounded by tall firs near Blakely Harbor, and limbs keep hitting the roof. What is the best metal roof for that kind of tree cover?
For heavy tree cover, we often recommend standing seam or metal shingle roofing because both handle impact better than thin panels and shed debris more cleanly. We also check the flashing and fasteners closely, since shade and debris keep the roof wet longer and that is where problems start. A free inspection will tell you if a repair is enough or if a section needs replacement.
A windstorm just peeled back part of my roof near the ferry terminal. How fast can you get out to Bainbridge Island?
We prioritize storm and wind damage calls and can usually schedule a free inspection within a day or two, depending on ferry traffic and weather. Call (425) 648-6332 and describe the damage. We will tarp or secure the area if needed and give you a clear repair plan.
What does a typical metal roof replacement cost on Bainbridge Island?
Most full replacements start around $9 per square foot for the roofing itself, but the total depends on square footage, roof complexity, whether we remove the old roof, and access. A simple rambler off Madison Avenue will price differently than a steep-roofed waterfront home. We provide a free written estimate so you can see the breakdown.
Do I need a permit to replace my roof in Bainbridge Island, and does the city have design rules?
Yes, a roofing permit is commonly required for a full replacement, and the rules can vary by project. The City of Bainbridge Island website at https://www.bainbridgewa.gov is the right place to confirm current requirements, and we can help you with the paperwork. Historic districts or HOAs may also have design review for panel profile and color.
My neighbor's tree branches hang over my roof line. Can I trim them, and does my HOA need to approve a metal roof?
In Washington, you generally have the right to trim branches that cross onto your property, but it is best to talk with your neighbor first and stay within local rules. If you are in an HOA, check the covenants before you choose a panel profile or color, and we can provide product specs to help with the approval.
Are you fully insured for work on Bainbridge Island homes?
Yes. We carry general liability insurance and workers' compensation coverage for our crews. We are happy to provide proof of insurance before we start, so you know you are protected.
What maintenance does a metal roof need in Bainbridge Island's wet climate?
The main thing is keeping debris and moss off the roof and out of the gutters, especially under trees. We recommend an annual inspection, checking fasteners and flashing after storm season, and cleaning gutters before the fall rains. A coating can help on older panels, but a quick look each year prevents most leaks.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Seattle

All your work handled by qualified professionals in Seattle

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Seattle

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Seattle · Response within 24h · No commitment · ☎ (425) 648-6332

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Seattle ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm