Serving the Seattle area  ·  (425) 648-6332  ·  Open Mon-Sun 7am-7pm
📞 (425) 648-6332 Free Quote

Metal Roofing in Federal Way, WA (98003) · Local Professionals

Seattle Metal Roofing · Fast response in Federal Way and the Seattle area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Federal Way is a city of tall firs, steep driveways, and a mix of 1960s ramblers, split-levels, and newer infill homes tucked between Puget Sound and the Cascade foothills. If your roof is original to the house or has been patched one too many times, you already know how fir needles and winter windstorms treat asphalt shingles around here.

Homeowners in Federal Way (98003) call Seattle Metal Roofing because we understand the specific wear that comes from living under a canopy of Douglas firs and western red cedars. From the neighborhoods near Steel Lake Park to the slopes above the Commons, we have been solving roof problems for this city since 2009. We are a Metal Roofing Alliance member, fully insured, and we know what it takes to keep a roof tight through a Puget Sound winter.

Metal Roofing in Federal Way (98003)

Federal Way sits on a series of ridges and valleys, and that terrain shapes every roofing job we do here. Many homes are built into a hillside with a daylight basement and a steep driveway, which means tight access for staging materials and a real need to plan where we set up. The soil is often heavy with clay, so gutter downspouts need to move water well away from the foundation, especially on the older ramblers and split-levels that make up so much of the housing stock. And then there are the trees: tall Douglas firs and bigleaf maples drop limbs and needles year round, and those limbs are the number one cause of dented panels and torn flashing in Federal Way. We see it every winter after a windstorm. Our crews are L&I-registered and insured, and we handle everything from a single panel repair to a full metal roof replacement with new gutters sized for the roof pitch and the tree load.

Our experience serving Federal Way and the Seattle area, since 2009.

Our services in Federal Way

How a Job Works in Federal Way

Step 1: You call us at (425) 648-6332 or request a free estimate online. We schedule an on-site assessment, walk the roof and the attic if accessible, and talk through what you are seeing (a leak, a dent, a loose panel, or just an aging shingle roof). We give you a written scope and a clear price, no pressure and no surprises.

Step 2: Once you approve, we pull the required roofing permit through the local building department and schedule the work. In Federal Way, tight lots and steep driveways mean we plan material delivery and staging carefully, and if your home is in an HOA or a neighborhood with design review, we help you get the panel profile and color approved before we order. We protect landscaping and keep the site secure each night.

Step 3: When the job is done, we clean up thoroughly, haul away old materials, and walk the finished roof with you. We leave your property clean and show you what to watch for in the future.

Pricing in Federal Way depends on the size and pitch of your roof, how accessible the property is, the condition of the existing roof, and how soon you need the work done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and a full metal roof replacement starts at $9 per square foot. If you are retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot, though code limits how many layers you can cover. Repairs start at $450, screw replacement and re-fastening starts at $750, and flashing or chimney repair starts at $600. Gutters for metal roofs start at $9 per linear foot. Every roof is different, so call us at (425) 648-6332 for a free estimate and a realistic number for your Federal Way home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Federal Way and nearby areas.

My 1960s rambler near Steel Lake has a low-pitch roof and big firs overhead. Is standing seam a good fit?
Low-pitch roofs can work well with standing seam because the panels shed fir needles and debris better than shingles, but we need to check the pitch and the condition of the deck first. For very low slopes we may recommend a specific panel profile or a membrane underlayment. We will tell you honestly what will perform best under your trees.
A fir limb came down on my roof during a windstorm and I have a leak. How fast can you get out to Federal Way?
We prioritize active leaks and storm damage. Call us at (425) 648-6332, and we will schedule the soonest available inspection, often same day or next day depending on the season. We can tarp or make a temporary repair to stop water intrusion, then give you a written plan for permanent repairs.
What does a typical metal roof replacement cost for a three-bedroom split-level in Federal Way?
Most split-levels in Federal Way fall in a range that depends on square footage, roof complexity, and whether we remove the old shingles or retrofit. As a starting point, replacement begins at $9 per square foot, but a typical home often lands between $12,000 and $25,000. We give you an exact written estimate after a free on-site assessment.
Do I need a permit to replace my roof in Federal Way, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and the rules vary by jurisdiction. We verify the current requirements with the City of Federal Way website and pull the permit for you as part of the job. We do not guess at fees or inspection thresholds; we confirm them with the city before work starts.
My neighbor's tree drops limbs on my roof. What are my options if the tree is on their property?
Property line and tree ownership questions are civil matters, so we cannot give legal advice. Practically, we can install snow guards or heavier gauge panels to resist impact, and we can document the damage for your insurance claim. If you are in an HOA, check the CC&Rs first, and we are happy to coordinate with your neighbor and the HOA on scheduling and access.
Are you fully insured for work at my Federal Way home?
Yes. We carry general liability insurance and workers' compensation coverage for our crews. We are happy to provide a certificate of insurance before we start, so you have peace of mind that you are covered if anything goes wrong on the job.
What maintenance does a metal roof need in Federal Way to handle the moss and fir needles?
Fir needles and moss are the main enemies here. We recommend clearing needles from valleys and gutters at least twice a year, especially after fall storms, and having us inspect fasteners and sealant every few years. A metal roof coating can help on older panels, and proper gutter sizing with leaf guards makes a big difference under heavy tree cover.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Seattle

All your work handled by qualified professionals in Seattle

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Seattle

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Seattle · Response within 24h · No commitment · ☎ (425) 648-6332

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Seattle ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm