Serving the Seattle area  ·  (425) 648-6332  ·  Open Mon-Sun 7am-7pm
📞 (425) 648-6332 Free Quote

Metal Roofing in Bothell, WA (98011) · Local Professionals

Seattle Metal Roofing · Fast response in Bothell and the Seattle area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Bothell's mix of 1960s ramblers, newer infill townhomes, and wooded lots along the Sammamish River corridor means one thing for roofs: debris and wind. Fir limbs and cedar needles pile up fast, and when a Pacific windstorm rolls through, loose trim and panel edges take a beating. If your metal roof is showing its age or you're planning a replacement, we're the local crew that knows these neighborhoods block by block.

Homeowners in Bothell (98011) call Seattle Metal Roofing because we've been working under these same tall firs and gray skies since 2009. We're a Metal Roofing Alliance member, fully insured, and we handle everything from a single leak repair near downtown Bothell to a full standing seam install in Canyon Park. One call to (425) 648-6332 gets a real conversation and a free on-site estimate.

Metal Roofing in Bothell (98011)

Bothell sits on rolling terrain between the Sammamish River and the hills above Lake Washington, and that geography shapes every roofing job. Older neighborhoods like Downtown Bothell and the areas off Bothell Way have mature Douglas firs and bigleaf maples that drop limbs and fill gutters, so we see a lot of punctures, clogged drainage, and moss growth on shaded north slopes. Newer developments near Canyon Park and the North Creek area bring tighter lots and steeper pitches, which means careful staging and sometimes crane work for standing seam panels. The wind that funnels off the water and through the river valley is another factor: it lifts loose ridge caps, edge trim, and fasteners, especially on roofs that weren't fastened to current wind standards. We build every install with that in mind, using screws and clips rated for the exposure, and we check existing decks for rot before we ever lay a panel.

We've been serving Bothell and the greater Seattle area since 2009, and our crews are L&I-registered and fully insured. That matters when you're hiring someone to work at height on a wooded lot with limited access.

Our services in Bothell

How a Job Works in Bothell

Step 1: You call (425) 648-6332 or request a free estimate online. We schedule an on-site assessment, walk the roof and attic with you if you're home, and take photos of any problem areas. You get a written scope and a clear price before any work starts, whether it's a $450 leak repair or a full replacement.

Step 2: Once you approve, we pull the required roofing permit through the City of Bothell and coordinate any HOA design review if your neighborhood has one. On tight lots near downtown or in the hills, we plan material delivery and staging carefully so we don't block driveways or damage landscaping. Crews typically work in sections, protecting your plants and siding as we go.

Step 3: When the job is done, we magnet-sweep the yard and driveway for stray screws, haul away all old materials, and walk the finished roof with you. We don't leave until you've seen the work and we've confirmed the cleanup is complete.

Metal roofing in Bothell runs from about $5.50 per square foot for corrugated and ribbed panel roofing up to $20 per square foot for copper and specialty metals. Standing seam starts around $10 per square foot, metal shingle and stone-coated steel around $9, and a metal roof over existing shingles (retrofit) starts at about $7. Small repairs like leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. The biggest cost factors are roof size and pitch, how much tear-off and deck repair is needed, access on wooded or sloped lots, and how quickly you need the work done after a storm. We give free estimates and itemized pricing, so call (425) 648-6332 to get a number for your specific roof.

✅ Metal Roofing Alliance Member, licensed and insured for work in Bothell and nearby areas.

My Bothell home is surrounded by tall firs. How do I keep limbs from damaging my metal roof?
That's the number one issue we see in wooded Bothell neighborhoods. We recommend having an arborist inspect and thin limbs that overhang the roof, especially those within 10 feet of the surface. We also install heavy-duty gutter guards and check fasteners after windstorms, since a small puncture from a falling branch can turn into a leak fast. If you've already got damage, we offer free storm damage inspections.
How fast can you respond to storm damage in Bothell?
We prioritize active leaks and wind damage, especially after a Pacific windstorm. Call (425) 648-6332 and we'll schedule the soonest available inspection, often within a day or two. For emergency leaks, we can often provide temporary tarping to stop water intrusion while we schedule permanent repairs.
What does a typical metal roof replacement cost in Bothell?
Most full replacements in Bothell fall between $9 and $14 per square foot installed, depending on the panel type, roof complexity, and whether we're tearing off the old roof. A 1,800-square-foot rambler might run $16,000 to $25,000 for standing seam, while a smaller repair could be $450 to $1,500. We give free, no-pressure estimates with line-item pricing.
Do I need a permit to replace my roof in Bothell?
Yes, a full roof replacement or re-roof typically requires a permit from the City of Bothell. Requirements and fees vary, so we always confirm the current rules with the city before starting. You can check basic information at https://www.bothellwa.gov, and we handle the permit application as part of your project.
My HOA has design rules. Can you help with approval for a metal roof?
Yes. Many Bothell-area HOAs have architectural review requirements for roof color and panel profile. We can provide product samples, manufacturer specs, and color renderings to submit with your application. We'll also coordinate directly with your HOA if needed so the approval process doesn't hold up your project.
Are you insured for work on my Bothell property?
We are fully insured, carrying both general liability and workers' compensation coverage. We're happy to provide a certificate of insurance before work begins. Our crews are L&I-registered, so you're protected if anyone is injured on the job.
What maintenance does a metal roof need in Bothell's climate?
Bothell's damp winters and shaded lots mean moss and debris are the main concerns. We recommend cleaning gutters at least twice a year, especially in fall after the maples drop, and having the roof inspected annually for loose fasteners or sealant wear. A coating every 10 to 15 years can extend the life of painted panels. We offer maintenance plans and free inspections to catch small issues early.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Seattle

All your work handled by qualified professionals in Seattle

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Seattle

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Seattle · Response within 24h · No commitment · ☎ (425) 648-6332

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Seattle ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm