Serving the Seattle area  ·  (425) 648-6332  ·  Open Mon-Sun 7am-7pm
📞 (425) 648-6332 Free Quote

Metal Roofing in Redmond, WA (98052) · Local Professionals

Seattle Metal Roofing · Fast response in Redmond and the Seattle area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Redmond is not Seattle. The lots are bigger, the trees are taller, and the roofs take a beating from both. If you live off Redmond Way or up in Education Hill, you already know how fast moss can take over a shaded shingle roof, and how one November windstorm can turn a quiet street into a cleanup zone.

We are Seattle Metal Roofing, and since 2009 we have been installing, repairing, and replacing metal roofs across Redmond and the surrounding Eastside. From the wooded subdivisions near Marymoor Park to the newer townhomes around Downtown Redmond, we know what the local weather does to a roof, and we build for it.

Metal Roofing in Redmond (98052)

Redmond sits in a basin of tall firs and cedars, and that is the first thing we look at when we pull up to a property. Shade keeps a roof damp, and damp roofs grow moss. On the older ramblers and split-levels around Grass Lawn and Overlake, we often find original shingle roofs that have been nursed along for decades, with moss working its way under the tabs and fasteners starting to back out. The terrain matters too. Many Redmond lots slope toward a ravine or a drainage easement, so we plan for where water goes, not just where it lands. Tight side yards in the older neighborhoods mean we stage materials carefully and protect landscaping. And the big firs? They drop limbs, and the November 2024 bomb cyclone was a reminder that a metal roof can take a hit that would punch straight through asphalt shingles.

Our team has been serving Redmond and the greater Seattle area since 2009. We are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we handle everything from a single leak repair to a full standing seam installation.

Our services in Redmond

How a Job Works in Redmond

Step 1: You call us at (425) 648-6332 or reach out online, and we schedule a free on-site assessment. We walk the roof with you, check the attic if it is accessible, look at the flashing and fasteners, and talk through what you are seeing. You get a written estimate with clear line items, not a ballpark on the back of a card.

Step 2: Once you approve, we pull the required permits through the City of Redmond and coordinate any HOA design review if your neighborhood has one. On the day of the job, our crews protect your landscaping, set up safe access, and get to work. If your home is in a tight-lot subdivision off Avondale Road or a steep driveway in Union Hill, we plan the staging and dumpster placement ahead of time so we are not blocking your neighbors.

Step 3: Cleanup is part of the job, not an afterthought. We magnet-sweep for nails, haul away old materials, and do a final walkthrough with you to make sure you are satisfied. We leave your property clean and your roof ready for the next storm season.

Pricing in Redmond depends on the size and pitch of your roof, the condition of the existing decking, access around the house, and how soon you need it done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and metal roof replacement starts around $9 per square foot. If you are retrofitting over existing shingles, that starts around $7 per square foot, though local code limits how many layers you can cover. Repairs and leak fixes start around $450, screw replacement and re-fastening starts around $750, and flashing or chimney repair starts around $600. We give free estimates, so call (425) 648-6332 and we will give you a real number for your specific roof.

✅ Metal Roofing Alliance Member, licensed and insured for work in Redmond and nearby areas.

My house is in a wooded area near Marymoor Park and the roof is always shaded. Is metal a good choice for moss?
Yes. Metal roofs do not absorb moisture the way asphalt shingles do, and moss has a much harder time getting a foothold on a smooth metal panel. We still recommend keeping debris off the roof and trimming back overhanging branches, but a metal roof in a shaded Redmond lot will stay cleaner and last longer than a shingle roof in the same spot.
A storm just dropped a big fir limb on my roof in Redmond. Can you inspect it quickly?
Call us at (425) 648-6332. We offer free inspections and storm damage estimates, and we prioritize active leaks and storm damage. If the limb has punctured the roof or you see daylight, we will get someone out to assess it and tarp it if needed.
What does a typical metal roof replacement cost in Redmond?
Most Redmond replacements fall somewhere between the low teens and the high twenties per square foot depending on the material and complexity, with standing seam at the higher end and corrugated or ribbed panels at the lower end. Steep pitches, multiple roof planes, and difficult access add to the cost. We give free estimates so you get a real number instead of a range.
Do I need a permit from the City of Redmond for a metal roof replacement?
In most cases yes, a roofing permit is required for a full replacement or re-roof, and the requirements vary by project. The City of Redmond website is the best place to confirm what applies to your address, and we handle the permit application and inspections as part of the job.
My HOA in Redmond has design rules. Can you help with approval before we order panels?
Yes. We have worked with HOAs across the Eastside and can provide panel profiles, color samples, and specification sheets for your architectural review. We recommend getting HOA approval before ordering materials so there are no surprises. We can also advise on property line setbacks and drainage direction if your roof drains toward a neighbor.
Are you insured for work on my Redmond property?
Yes. We are fully insured with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before work begins so you have it for your records.
What should I do to get my Redmond roof ready for the rainy season?
Late summer and early fall are the best time to clear debris from valleys and gutters, check the flashing around chimneys and skylights, and look for loose fasteners or lifted panels. If your roof is shaded by firs, a fall inspection is worth it. We offer free estimates and can catch small issues before the atmospheric rivers arrive.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Seattle

All your work handled by qualified professionals in Seattle

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Seattle

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Seattle · Response within 24h · No commitment · ☎ (425) 648-6332

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Seattle ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm