Serving the Seattle area  ·  (425) 648-6332  ·  Open Mon-Sun 7am-7pm
📞 (425) 648-6332 Free Quote

Metal Roofing in Tacoma, WA (98402) · Local Professionals

Seattle Metal Roofing · Fast response in Tacoma and the Seattle area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Tacoma's North End is full of 1920s Craftsman bungalows and Tudor revivals with steep pitches and mature trees that drop needles and limbs right onto the roof. If your place near Wright Park or along North Pearl Street is due for a reroof, you already know the old shingles are tired and the moss keeps coming back. We install and repair metal roofs built for this exact climate: wet winters, wind off Puget Sound, and shade that never dries out.

Homeowners in 98402 call Seattle Metal Roofing because we've been working Puget Sound roofs since 2009 and we know what fails here. Failed fasteners, separated seams, and flashing gaps around chimneys and skylights are the usual culprits. We're a Metal Roofing Alliance member, fully insured, and we handle everything from a single leak repair to a full standing seam replacement.

Metal Roofing in Tacoma (98402)

Tacoma sits on steep hills between Commencement Bay and the North End's tree canopy, and that terrain changes how a roof job runs. North End lots are often narrow with mature Douglas firs and western red cedars crowding the roofline, so we plan panel staging and ladder access carefully to avoid crushing plantings or blocking the alley. Older homes here have skip sheathing or layered shingles underneath, which means we check decking and ventilation before we quote a retrofit. Moss and algae take hold on any shaded north slope, and metal roofing with a good finish and proper pitch sheds that growth far better than asphalt. Wind off the water can lift panel edges if fasteners or clips are undersized, so we spec hardware for the exposure. And when we tear off, we tarp and haul debris the same day because Tacoma lots are tight and neighbors notice.

Our team has served Tacoma and the greater Seattle area since 2009, with L&I-registered, insured crews handling metal roof replacement and metal shingle roofing on historic North End homes as well as newer builds.

Our services in Tacoma

How a Job Works in Tacoma

Step 1: you call (425) 648-6332 or request a free estimate, and we schedule an on-site assessment. We walk the roof, check flashing, fasteners, and decking, and talk through whether a repair, a retrofit over existing shingles, or a full replacement makes sense for your Tacoma home.

Step 2: we pull the required roofing permit through the City of Tacoma and coordinate timing with your schedule. On tight North End streets we plan material delivery and dumpster placement so we don't block the alley or a neighbor's driveway, and if your home is in a historic district or HOA we help you choose a panel profile and color that will pass design review.

Step 3: we clean up every day, run a magnet sweep for fasteners, and do a final walkthrough with you before we call the job done. We leave your property clean and your gutters clear.

Pricing in Tacoma depends on roof size, pitch, access, decking condition, and how soon you need it done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Smaller jobs like metal roof repair or leak repair start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Storm and wind damage inspections are free, and we document everything for your insurance claim (coverage is up to your carrier, and deductibles are your responsibility). Call (425) 648-6332 for a free estimate on your Tacoma property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Tacoma and nearby areas.

My North End bungalow has original skip sheathing and two layers of old shingles. Can you still do a metal roof over shingles?
Sometimes, yes, but code limits how many existing layers you can recover over, and skip sheathing needs a solid underlayment or new decking before panels go down. We inspect the decking and attic ventilation first, then tell you honestly whether a retrofit or a full tear-off is the better call for your Tacoma home.
A windstorm just peeled back panels on my roof near Point Defiance. How fast can you get out?
Call (425) 648-6332 and we'll schedule a free storm damage inspection as soon as possible, usually within a day or two depending on volume after a wind event. We tarp active leaks, document the damage for your insurer, and give you a written repair estimate before any work starts.
What does a typical metal roof replacement cost for a mid-size Tacoma house?
Most Tacoma homes fall somewhere between a repair and a full replacement, and replacement typically starts around $9 per square foot for metal roofing, with standing seam starting at $10. Your actual number depends on square footage, roof pitch, decking repairs, and whether you need tear-off or can retrofit. We give free written estimates so you can compare.
Do I need a permit to reroof my house in Tacoma, and who handles it?
A full replacement or re-roof commonly requires a roofing permit, and thresholds and inspection requirements vary, so we verify the current rules with the City of Tacoma before scheduling. Our team pulls the permit and coordinates inspections as part of the job, so you don't have to chase paperwork.
My neighbor says my new metal roof panels overhang the property line. How do we handle that and HOA approval?
We set panels to stay within your roof footprint and respect setback and property line rules, and we'll review the survey or plat if there's any question. If your Tacoma neighborhood has an HOA or historic design review, we help prepare the panel profile and color submittal so approval doesn't hold up the job.
Are your crews covered by insurance if someone gets hurt or something gets damaged on my property?
Yes. We carry general liability insurance and workers' compensation coverage for our crews, and we're happy to provide proof of coverage before work begins. That protects you if there's an accident or property damage during your Tacoma roofing project.
What maintenance does a metal roof need in Tacoma's wet, shady climate?
Keep gutters and valleys clear of fir needles and leaves, trim tree limbs back from the roof, and have fasteners and sealant checked every few years, especially on shaded north slopes where moss and algae want to grow. We offer free inspections and coating services to keep the finish and fasteners in good shape through Tacoma's rainy season.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Seattle

All your work handled by qualified professionals in Seattle

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Seattle

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Seattle · Response within 24h · No commitment · ☎ (425) 648-6332

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Seattle ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm