Serving the Seattle area  ·  (425) 648-6332  ·  Open Mon-Sun 7am-7pm
📞 (425) 648-6332 Free Quote

Metal Roofing in Mukilteo, WA (98275) · Local Professionals

Seattle Metal Roofing · Fast response in Mukilteo and the Seattle area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Mukilteo is a bluff-top town where the wind comes straight off Puget Sound and the firs are tall enough to drop limbs on your roof. The housing stock here runs from mid-century ramblers near Mukilteo Elementary to newer view homes along the waterfront and up the hill toward Harbour Pointe, with plenty of steep driveways and tight lots in between.

Homeowners in 98275 call Seattle Metal Roofing because we know what that wind does to standing seam panels and trim, and we have been fixing it since 2009. Whether you are near the Mukilteo Lighthouse or up by Kamiak High School, we can get your roof ready for the next storm.

Metal Roofing in Mukilteo (98275)

Mukilteo sits on a series of bluffs and slopes that drop toward the Sound, so roof work here is rarely flat and easy. Many homes have steep pitches, limited side-yard access, and mature Douglas firs and cedars that hang over the roofline. That means two things: wind-driven rain finds every flashing gap, and falling limbs dent panels and tear trim in winter storms. We see a lot of failed fasteners and separated seams on older metal roofs, plus ice damming at the eaves on the higher elevations toward Harbour Pointe. Our crews are L&I-registered and fully insured, and we handle everything from standing seam installation to storm and wind damage repair.

Our experience serving Mukilteo and the Seattle area, since 2009.

Our services in Mukilteo

How a Job Works in Mukilteo

Step 1: You call us at (425) 648-6332 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and we walk the roof with you to identify any leaks, damaged panels, or flashing issues. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required roofing permit through the city and coordinate with your HOA if you have one. On tight Mukilteo lots, we plan material staging carefully so we do not block your neighbors or your driveway. Most residential metal roofs take a few days to a week depending on size and complexity.

Step 3: We clean up every day and do a final walkthrough with you. We haul away old materials, check that gutters and downspouts are clear, and make sure you know how to spot any issues before the next storm season.

Pricing in Mukilteo depends on the size and pitch of your roof, access, and the condition of the existing structure. As a ballpark, metal roof installation starts around $8 per square foot, standing seam runs from $10 per square foot, and metal roof replacement starts at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs, including leak fixes, start at $450, and screw replacement or re-fastening starts at $750. We always provide a free estimate so you know exactly what your job will cost. Call (425) 648-6332 to schedule yours.

✅ Metal Roofing Alliance Member, licensed and insured for work in Mukilteo and nearby areas.

My house is on a steep bluff near the Mukilteo ferry terminal and the wind really hits it. What metal roof holds up best?
For exposed bluff-top homes, we usually recommend standing seam metal roofing because the panels are fastened with concealed clips and have no exposed screws for the wind to grab. We also pay close attention to the trim and flashing details, since those are the first things to fail in a Pacific windstorm. We can assess your specific exposure and recommend the right profile and gauge.
A fir limb came down on my roof during the last storm and I think a panel is punctured. Can you come out quickly?
Yes. We offer storm and wind damage repair with a free inspection, and we prioritize active leaks and punctures. Call us at (425) 648-6332 and we will schedule a visit as soon as possible. If the damage is severe, we can tarp the area to prevent further water intrusion while we order materials.
What does a typical metal roof repair cost in Mukilteo?
Most repairs start at $450, which covers common issues like leak repair, flashing fixes, or replacing a few fasteners. Larger jobs like screw replacement across the whole roof start at $750. The final price depends on the extent of the damage, roof access, and whether we need to match existing panels. We give you a firm quote after the free inspection.
Do I need a permit to replace my roof in Mukilteo?
In most cases, yes. A full replacement or re-roof typically requires a roofing permit, and the rules and fees are set by the city. We handle the permit application for you and make sure the work meets local code. You can also check the City of Mukilteo website for general information, but we will walk you through what is needed for your specific project.
My neighbor and I share a property line, and I want to make sure my new roof does not cause drainage issues on their side. What should I do?
We always check property lines and drainage patterns before starting. If your roof drains toward a neighbor's lot, we can adjust gutter placement or add downspout extensions to direct water away. If you are in an HOA, we also help coordinate approval for panel profile and color so there are no surprises.
Are you fully insured for work at my Mukilteo home?
Yes. We carry general liability insurance and workers' compensation coverage for every job. We are happy to provide a certificate of insurance before we start so you have it on file.
What maintenance should I do each year to keep my metal roof in good shape in Mukilteo?
Check for moss and algae buildup on shaded sections, especially under fir trees, and clear debris from gutters and valleys. After storm season, look for loose or lifted panels and any signs of water staining on ceilings. We offer free inspections and can set up a maintenance plan to catch small issues before they become leaks.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Seattle

All your work handled by qualified professionals in Seattle

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Seattle

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Seattle · Response within 24h · No commitment · ☎ (425) 648-6332

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Seattle ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm