Serving the Seattle area  ·  (425) 648-6332  ·  Open Mon-Sun 7am-7pm
📞 (425) 648-6332 Free Quote

Metal Roofing in Kirkland, WA (98033) · Local Professionals

Seattle Metal Roofing · Fast response in Kirkland and the Seattle area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Kirkland's lakefront and hillside homes face some of the toughest roofing conditions on the Eastside. From the Craftsman bungalows near downtown to the modern standing seam contemporaries overlooking Lake Washington, roofs here take a beating from rain, moss, and wind. We're Seattle Metal Roofing, and we've been solving those problems since 2009.

Homeowners in Kirkland (98033) call us because we understand the local housing stock, from the older homes in Houghton and Bridle Trails to the newer builds near Juanita Bay. We know the moss, the wind off the lake, and the steep driveways that make access tricky. Our crews are fully insured and L&I registered, and we specialize in the standing seam and copper accents that fit Kirkland's mix of classic and contemporary styles.

Metal Roofing in Kirkland (98033)

Kirkland's terrain is a big part of the job. Many homes sit on steep hillsides with tight lots, limited driveway access, and mature Douglas firs and bigleaf maples that drop debris and shade roofs, which encourages moss and algae growth. Lakefront properties near Marsh Park and along the Kirkland waterfront face wind-driven rain off Lake Washington, while homes in Bridle Trails and other wooded areas deal with fallen limbs and needle buildup. We plan each project around the grade, the tree canopy, and the drainage, because a roof that sheds water poorly will cause problems at the gutters and foundation. Our team is experienced with the flashing details and panel profiles that work on Kirkland's varied architecture, from the older bungalows to the newer infill townhomes.

We've been serving Kirkland and the greater Seattle area since 2009, and we're a Metal Roofing Alliance member. That means we stay current on installation best practices for the Pacific Northwest climate.

Our services in Kirkland

How a Job Works in Kirkland

Step 1: You call us at (425) 648-6332 or request a free estimate online. We'll schedule an on-site assessment at your Kirkland property, where we inspect the roof, check for leaks, moss, or storm damage, and discuss your options. We'll also talk about any HOA or historic district requirements if they apply.

Step 2: Once you approve the scope and price, we handle the work. For a full replacement, we pull the necessary permits through the City of Kirkland, coordinate with your schedule, and manage the crew. On tight Kirkland lots, we plan material delivery and staging carefully to avoid blocking neighbors or damaging landscaping. If your home is in a neighborhood with design review, we can help you understand what panel profiles and colors are allowed.

Step 3: After the job, we clean up thoroughly, haul away old materials, and do a final walkthrough with you. We make sure you're satisfied with the installation and that your property is left clean. We also provide documentation for any insurance claims if storm damage was involved.

Pricing for metal roofing in Kirkland depends on the size and complexity of your roof, access, existing conditions, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting start at $2.50 per square foot, and gutters start at $9 per linear foot. These are starting prices, and we'll give you a firm quote after a free on-site assessment. Call (425) 648-6332 to schedule yours.

✅ Metal Roofing Alliance Member, licensed and insured for work in Kirkland and nearby areas.

My Kirkland home is surrounded by tall Douglas firs and the roof is always shaded. What metal roofing works best to prevent moss?
Shade and debris are common in Kirkland neighborhoods like Bridle Trails and Houghton. For heavily shaded roofs, we recommend standing seam metal with a factory-applied coating that resists moss and algae, and we often add a zinc strip near the ridge to inhibit growth. Proper ventilation and regular cleaning also help. We can assess your specific tree cover and suggest the best profile and finish.
A windstorm just blew some panels loose on my Kirkland roof. How fast can you respond?
We offer free inspections for storm and wind damage in Kirkland. Call us at (425) 648-6332, and we'll schedule a visit as soon as possible, usually within a day or two depending on demand. We'll secure the roof to prevent further damage, document the issues for insurance, and provide a repair estimate.
What does a typical metal roof replacement cost for a 2,000 square foot home in Kirkland?
For a 2,000 square foot home, a basic metal roof replacement might start around $18,000 to $25,000, depending on the material, roof pitch, and access. Standing seam or copper will be higher. These are rough estimates; we provide a detailed quote after inspecting your roof and discussing your options.
Do I need a permit to replace my roof in Kirkland, and how do I get one?
Yes, roofing permits are typically required for a full replacement or re-roof in Kirkland. The rules and fees are set by the city, and you can find information on the City of Kirkland website at https://www.kirklandwa.gov. We handle the permit application for you as part of our service.
My neighbor's tree branches hang over my roof in Kirkland. Can I trim them, and do I need HOA approval for a new roof color?
In Washington, you generally have the right to trim branches that cross your property line, but it's best to talk with your neighbor first and check local ordinances. For HOA approval, many Kirkland neighborhoods have design guidelines that restrict roof colors and materials. We can provide product samples and documentation to help you get approval before ordering materials.
Are you fully insured for roofing work in Kirkland, and what does that cover?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of an accident on the job. We're happy to provide a certificate of insurance upon request.
How often should I have my metal roof inspected in Kirkland, and what maintenance does it need?
We recommend an inspection every two to three years, especially after major storms. Kirkland's moss and tree debris can clog gutters and trap moisture, so regular cleaning is important. We offer free estimates for inspections and can advise on maintenance tasks like tightening fasteners and checking sealant around flashing.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Seattle

All your work handled by qualified professionals in Seattle

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Seattle

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Seattle · Response within 24h · No commitment · ☎ (425) 648-6332

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Seattle ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm