Serving the Seattle area  ·  (425) 648-6332  ·  Open Mon-Sun 7am-7pm
📞 (425) 648-6332 Free Quote

Metal Roofing in Shoreline, WA (98133) · Local Professionals

Seattle Metal Roofing · Fast response in Shoreline and the Seattle area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Shoreline is a city of post-war ramblers and split-levels, many of them built in the 1950s and 1960s with low-pitch roofs that have been fighting moss and rain for decades. Drive through neighborhoods like Richmond Beach or along Aurora Avenue and you will see it: cedar shakes and asphalt shingles dark with algae, holding moisture until the moss lifts the edges.

That is why homeowners in Shoreline (98133) call Seattle Metal Roofing. We have been working on Puget Sound roofs since 2009, and we know how Shoreline's steady rain and shaded lots wear down a roof. Whether you are near Shoreline Community College or over by Paramount Park, we can tell you exactly what your roof is up against.

Metal Roofing in Shoreline (98133)

Shoreline sits on a plateau between Puget Sound and Lake Washington, with plenty of mature Douglas firs and bigleaf maples that drop needles and shade roofs all year. That shade is great in summer but it keeps roofs wet, and in a climate with long gray damp winters, that means moss and algae take hold fast. Many homes here have low-slope roofs over living spaces, and the original ventilation was often inadequate, so moisture gets trapped. We see a lot of failed fasteners and flashing gaps on older ramblers, especially where add-ons and carports meet the main house. Steep driveways and tight side yards are common too, which affects how we stage materials and equipment. Our crews are used to working around landscaping and fences without tearing up your yard.

We have been serving Shoreline and the greater Seattle area since 2009, and we are a Metal Roofing Alliance member. Our team is fully insured with general liability and workers' compensation, so you are covered from the first day on site.

Our services in Shoreline

How a Job Works in Shoreline

Step 1: You call us at (425) 648-6332 or fill out our online form, and we schedule a free on-site assessment. We will walk your roof, check the attic if accessible, and look at flashing, vents, and gutters. You get a written estimate with options, including metal roof over shingles (retrofit) if your existing roof qualifies.

Step 2: Once you approve, we handle the permit paperwork with the City of Shoreline and schedule the work. On the day of installation, our crew protects your landscaping, sets up safe access, and removes the old roofing if needed. For retrofits, we install new battens and underlayment over the existing shingles, which saves you disposal costs and time. We keep the site organized and clean up debris daily.

Step 3: After the job is done, we do a final walkthrough with you, checking that all flashing is sealed, gutters are clear, and the site is clean. We do not leave until you are satisfied. We also provide a written warranty and care tips for your new metal roof.

Pricing for metal roofing in Shoreline depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you are considering a retrofit over your current shingles, that starts at $7 per square foot. Repairs, including leak fixes, start at $450, and screw replacement or re-fastening starts at $750. We also offer metal roof coating and painting from $2.50 per square foot, which can extend the life of an existing metal roof. For a free estimate tailored to your Shoreline home, call us at (425) 648-6332.

✅ Metal Roofing Alliance Member, licensed and insured for work in Shoreline and nearby areas.

My Shoreline rambler has moss growing on the roof and some shingles are lifting. Is it worth switching to metal?
Moss is a common problem in Shoreline because of our damp, shaded lots. If your shingles are lifting or you see granules in the gutters, the roof is likely near the end of its life. Metal roofing is a good fit here because it resists moss and algae, and it sheds water quickly. We can inspect your roof and let you know if a retrofit over the existing shingles is possible, which can save you money.
A windstorm just took off some panels on my metal roof near Richmond Beach. Can you help?
Yes. We handle storm and wind damage repair in Shoreline and the surrounding areas. Call us at (425) 648-6332 for a free inspection. We will secure the roof, document the damage for your insurance claim if needed, and make permanent repairs. We do not promise coverage, but we can provide the documentation your adjuster will want.
What does a typical metal roof replacement cost in Shoreline?
Most full replacements in Shoreline fall between $9 and $14 per square foot installed, depending on the material and roof complexity. A simple rambler with a low-slope roof might be on the lower end, while a home with dormers, valleys, and multiple levels will be higher. We give you a detailed estimate after a free inspection, so you know exactly what to expect.
Do I need a permit from the City of Shoreline for a metal roof?
In most cases, yes. A full replacement or re-roof requires a permit, and the requirements can vary. We recommend checking with the City of Shoreline website for the latest information. We handle the permit application for you as part of our service, so you do not have to navigate the process alone.
My HOA has design rules. Can you help with approval for a metal roof?
Yes. Many HOAs in Shoreline have guidelines about roof color and profile. We can provide product samples and documentation to submit to your HOA board. If there are property line concerns, we follow local setback rules and can coordinate with your neighbor if access is needed.
Are you insured for work on my Shoreline property?
Yes. We are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance upon request. Our team is also registered with the Washington State Department of Labor & Industries.
What maintenance does a metal roof need in Shoreline's climate?
Metal roofs are low maintenance, but in Shoreline's wet climate, we recommend an annual inspection to check for debris buildup, especially under trees. Keep gutters clear, and rinse off any moss or algae that appears. We offer metal roof inspection and maintenance services to keep your roof performing well for decades.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Seattle

All your work handled by qualified professionals in Seattle

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Seattle

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Seattle · Response within 24h · No commitment · ☎ (425) 648-6332

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Seattle ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm