Serving the Seattle area  ·  (425) 648-6332  ·  Open Mon-Sun 7am-7pm
📞 (425) 648-6332 Free Quote

Metal Roofing in Everett, WA (98201) · Local Professionals

Seattle Metal Roofing · Fast response in Everett and the Seattle area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Everett's older neighborhoods, from the historic homes off Colby Avenue to the waterfront blocks near the marina, take a beating from Puget Sound weather. The mix of early 1900s Craftsman bungalows, mid-century ramblers, and newer infill means roofs here face steady rain, marine air, and the occasional windstorm that sends fir limbs crashing down. If your roof is showing its age, we can help.

Homeowners in the 98201 ZIP code call Seattle Metal Roofing because we understand how salt air and constant dampness corrode fasteners and trim faster than most people expect. We have been serving Everett and the surrounding areas since 2009, and we know the local building stock, from the tight lots near Legion Memorial Park to the steep pitches on Rucker Hill.

Metal Roofing in Everett (98201)

Everett sits on a peninsula between the Snohomish River and Puget Sound, so marine air and moisture are constant companions. That means fasteners, flashing, and cut edges are the first things to fail on any metal roof. Older homes in the Bayside and Port Gardner neighborhoods often have complex rooflines with dormers and valleys that trap debris and hold water. Newer construction near the waterfront tends to use standing seam, but we also see plenty of exposed-fastener panels that need screw replacement and re-fastening after a few seasons. The city's tree canopy, especially the big maples and firs in the historic districts, drops leaves and limbs that can puncture panels or clog gutters, leading to ice dams in the rare cold snaps. We handle all of it, from full replacement to targeted repairs.

Our team has been working in Everett and the greater Seattle area since 2009. We are a Metal Roofing Alliance member and fully insured, with general liability and workers' compensation coverage. Whether you need a free estimate on a new standing seam roof or a quick fix for a leak, we bring the same local knowledge to every job.

Our services in Everett

How a Job Works in Everett

Step 1: You call us at (425) 648-6332 or fill out our online form. We schedule a free on-site assessment at your Everett property, where we inspect the roof, check for leaks, and discuss your options. We will also review any permit requirements with the City of Everett website so you know what to expect.

Step 2: Once you approve the estimate, we schedule the work. In Everett, tight lots and steep driveways are common, so we plan for material delivery and staging carefully. If your home is in a historic district or HOA, we help coordinate approval for panel profile and color. We pull the necessary permits and get to work, keeping you informed at every stage.

Step 3: After installation, we clean up thoroughly, haul away all debris, and walk the property with you to make sure you are satisfied. We leave your yard and driveway as clean as we found them, and we stand behind our work with a warranty.

Metal roofing in Everett is priced by the square foot, and the final cost depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical home, metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs, such as fixing a leak or replacing screws, start at $450, and snow guards start at $1,200. We also offer free estimates for storm damage and inspections. Call (425) 648-6332 to get a precise quote for your Everett property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Everett and nearby areas.

My house is in the Historic District near downtown Everett. Can I still get a metal roof?
Yes, but you will likely need design review approval. The historic district has guidelines about visible roof materials and colors. We can help you choose a profile that meets the requirements and prepare the paperwork for the City of Everett. We have worked with homeowners in the district before and can walk you through the process.
A windstorm just lifted some panels on my roof in Everett. How quickly can you respond?
We offer free inspections for storm damage and can usually get to you within a day or two, depending on the volume of calls. For active leaks or exposed areas, we can provide temporary protection. Call us at (425) 648-6332 to schedule an assessment.
What is the typical cost to replace a roof on a 1,500 square foot home in Everett?
For a home that size, a basic metal roof installation might start around $12,000 to $15,000, depending on the material and roof complexity. Standing seam would be higher, starting around $15,000. These are ballpark figures; we provide a free estimate after inspecting your roof.
Do I need a permit to replace my roof in Everett?
Yes, a roofing permit is typically required for a full replacement or re-roof. The City of Everett handles permitting, and requirements can vary based on the scope of work. We recommend checking with the city directly or asking us to help you navigate the process. We pull permits as part of our service.
My neighbor's tree branches hang over my roof. Can I trim them without permission?
In Washington, you generally have the right to trim branches that overhang your property line, but you cannot enter your neighbor's property or damage the tree. It is best to talk with your neighbor first. If the tree is in a common area or has a preservation order, check with the city. We can advise on roof protection and repairs if branches have caused damage.
Are you fully insured for work on my Everett property?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews. We are happy to provide a certificate of insurance upon request. You can have peace of mind knowing your property and our workers are protected.
How often should I have my metal roof inspected in Everett?
Because of the marine air and frequent rain, we recommend an inspection every two to three years, and after any major windstorm. Check for loose fasteners, corrosion at the edges, and debris buildup in valleys and gutters. Regular maintenance can extend the life of your roof and prevent costly leaks.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Seattle

All your work handled by qualified professionals in Seattle

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Seattle

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Seattle · Response within 24h · No commitment · ☎ (425) 648-6332

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Seattle ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm