Serving the Seattle area  ·  (425) 648-6332  ·  Open Mon-Sun 7am-7pm
📞 (425) 648-6332 Free Quote

Metal Roofing in Woodinville, WA (98072) · Local Professionals

Seattle Metal Roofing · Fast response in Woodinville and the Seattle area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Woodinville is a town of contrasts: winery tasting rooms and horse pastures on one side, dense new subdivisions and warehouse districts on the other. The housing stock runs from 1970s ranches and split-levels on wooded lots to brand-new craftsman-style builds with steep gables and standing seam accents. Drive down any road off State Route 202 and you'll see the same thing we do: moss creeping across shaded shingle roofs, fasteners backing out on older metal barns, and gutters that can't keep up with a Pineapple Express.

We're Seattle Metal Roofing, and since 2009 we've been installing, repairing, and replacing metal roofs across Woodinville and the surrounding Seattle area. We know the ZIP code 98072 well, from the older homes near downtown to the newer construction out toward the Sammamish River Valley. When your roof starts leaking or you're ready to upgrade, we're the local crew that shows up on time and knows the building department.

Metal Roofing in Woodinville (98072)

Woodinville sits in a valley where the Sammamish River cuts through, and that means heavy winter rain, saturated soils, and long stretches of damp, shaded conditions. Many properties here are on generous lots with mature Douglas firs and bigleaf maples, which is beautiful until the moss and algae take over a roof and the next windstorm drops a limb. We see a lot of older barns and outbuildings that need durable panel roofs, plus winery buildings and tasting rooms that want a clean standing seam look. On the residential side, homes range from 1970s ramblers with low-slope sections to newer builds with complex rooflines, and each one has its own drainage and access challenges. Tight driveways, steep grades, and landscaping mean we plan every job carefully before we ever set a ladder.

Our team has been serving Woodinville and the greater Seattle area since 2009. We're a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and our crews handle everything from a single leak repair to a full commercial metal roof.

Our services in Woodinville

How a Job Works in Woodinville

Step 1: You call us at (425) 648-6332 or request a free estimate online. We schedule an on-site assessment, walk the roof with you, and talk through what we find. No pressure, no sales pitch, just a clear explanation of the problem and your options.

Step 2: Once you approve the scope, we pull the required roofing permit through the City of Woodinville and coordinate any HOA design review if your neighborhood has one. On the day of the job, our crew protects your landscaping, sets up safe access (even on tight lots or steep grades), and gets to work. We keep you posted on progress and any surprises we find under the old roofing.

Step 3: When the work is done, we clean up thoroughly, haul away all debris, and walk the finished roof with you. We make sure you understand the warranty, the maintenance needs, and what to watch for. We leave your property clean, and we don't consider the job finished until you're satisfied.

Pricing for metal roofing in Woodinville depends on the size and complexity of your roof, the material you choose, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Stone-coated steel and metal shingles both start at $9 per square foot, while copper and specialty metals start at $20. We give you a written, itemized estimate before any work begins, so you know exactly what you're paying for. Call us at (425) 648-6332 for a free estimate on your Woodinville property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Woodinville and nearby areas.

My Woodinville home is surrounded by tall Douglas firs and the roof is always shaded. What's the best metal roofing option to handle moss and debris?
Shade and tree litter are the main reasons roofs fail early here. For heavily shaded lots, we often recommend standing seam metal roofing with a factory-applied finish that resists algae and moss growth. The smooth surface sheds needles and leaves quickly, and there are no exposed fasteners to catch debris. We can also add snow guards or a custom gutter system to keep things moving. Regular cleaning is still smart, but a quality metal roof will hold up far better than asphalt in these conditions.
A windstorm just peeled back some panels on my barn off Woodinville-Redmond Road. Can you handle emergency repairs?
Yes. We handle storm and wind damage repair, and we offer free inspections for storm damage. Call us at (425) 648-6332 and we'll get out to assess the damage, secure the roof if needed, and give you a clear repair plan. We work with agricultural and commercial buildings too, so barns and outbuildings are familiar territory.
What does a typical metal roof replacement cost for a 2,000-square-foot home in Woodinville?
For a 2,000-square-foot home, a basic metal roof installation might start around $16,000 to $20,000, depending on the material and roof complexity. Standing seam would be higher, roughly $20,000 to $25,000. These are ballpark figures; factors like roof pitch, number of penetrations, tear-off of old layers, and access all affect the final price. We provide a free, detailed estimate after an on-site visit, so you'll know exactly where you stand.
Do I need a permit to replace my roof in Woodinville, and where do I check the rules?
In most cases, yes, a roofing permit is required for a full replacement or re-roof in Woodinville. The rules and thresholds can vary, so it's always best to check directly with the City of Woodinville through their official website at https://www.woodinvillewa.gov. We're happy to help you navigate the permit process as part of our service.
My neighbor and I share a property line, and I'm worried about the roof overhang. What are the rules?
Property line issues can be tricky, and local setback rules apply. We recommend checking your plat map and any HOA guidelines before starting work. If your roof overhangs a property line, you may need a boundary survey or a neighbor agreement. We can coordinate with your neighbor and your HOA to make sure the installation respects property lines and design standards. We've worked in many Woodinville neighborhoods and can help you avoid disputes.
Are you fully insured for work on my Woodinville property?
Yes, we are fully insured with both general liability and workers' compensation coverage. We're happy to provide a certificate of insurance before we start any job, so you have peace of mind knowing you're protected.
What maintenance does a metal roof need in Woodinville's climate?
Metal roofs are low maintenance, but in our damp, shaded environment, we recommend an annual inspection to check for debris buildup, loose fasteners, and any signs of moss or algae. Keeping gutters clear is important, especially under trees. We offer metal roof inspections and can perform minor maintenance like screw replacement or coating to extend the life of your roof. A little preventive care goes a long way here.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Seattle

All your work handled by qualified professionals in Seattle

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Seattle

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Seattle · Response within 24h · No commitment · ☎ (425) 648-6332

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Seattle ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm