Serving the Seattle area  ·  (425) 648-6332  ·  Open Mon-Sun 7am-7pm
📞 (425) 648-6332 Free Quote

Metal Roofing in Sammamish, WA (98074) · Local Professionals

Seattle Metal Roofing · Fast response in Sammamish and the Seattle area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Sammamish sits up on the plateau east of Lake Sammamish, where tall Douglas firs and western red cedars tower over homes tucked into the hills. Lots here are often steep and wooded, and many houses are custom builds or 1990s contemporaries with complex rooflines that take a beating from Pacific windstorms.

When a big fir comes down in a November blow or moss starts creeping across a shaded roof, homeowners in 98074 call Seattle Metal Roofing. We have been working these hills since 2009, and we know how to handle the tight driveways, the tree canopy, and the wind exposure that come with living on the plateau.

Metal Roofing in Sammamish (98074)

Sammamish is not a flat grid of tract homes. The city is built on a plateau cut by ravines and greenbelts, with many properties backing onto dense forest or sitting on a slope that drops toward Lake Sammamish. That means roof work here often involves staging on a steep grade, protecting landscaping from falling debris, and planning for limited access where a driveway is narrow or shared. The tree cover is beautiful but it keeps roofs shaded and damp for months, which is why moss and algae are a constant battle on asphalt shingles. Standing seam metal roofing is a smart fit for Sammamish because the smooth panels shed needles and moss far better than shingles, and the concealed fasteners hold up to the wind that funnels across the plateau. We also see a lot of storm damage from fallen limbs, especially after events like the November 2024 bomb cyclone, and we handle storm and wind damage repair with free inspections. Our crews are L&I-registered and fully insured, and we have been serving Sammamish and the greater Seattle area since 2009.

Our services in Sammamish

How a Job Works in Sammamish

Step 1: You call us at (425) 648-6332 or request a free estimate online. We schedule an on-site assessment at your Sammamish property, and we look at the roof, the attic if accessible, the flashing, and the surrounding trees. You get a clear written estimate with options, not pressure.

Step 2: Once you approve, we handle the work. In Sammamish that often means coordinating with the city on permits, which are commonly required for a full replacement, and working around HOA design review if your neighborhood has one. We plan for tight access and steep grades, and we protect your landscaping and siding as we tear off or install over existing shingles where code allows. Our crews are careful with the tree canopy and use tarps and debris nets to keep needles and old roofing out of your gutters and beds.

Step 3: We clean up thoroughly, magnet-sweep the driveway and lawn for nails, and walk the finished roof with you. We do not leave until you are satisfied and the site is clean.

Pricing for metal roofing in Sammamish depends on the size and pitch of your roof, the material you choose, access, and how much repair or prep is needed. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts at $7 per square foot, and installation starts at $8 per square foot. Standing seam starts at $10 per square foot, and copper or specialty metal starts at $20 per square foot. Repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Storm and wind damage inspections are free. Call (425) 648-6332 for a free estimate tailored to your Sammamish home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Sammamish and nearby areas.

My Sammamish home is surrounded by tall firs. Will a metal roof handle falling limbs better than shingles?
Metal roofing is more impact resistant than asphalt shingles, but a large limb can still dent or puncture a panel. The bigger advantage in Sammamish is that metal sheds needles and moss, so the roof stays cleaner and you can see damage sooner. We inspect for punctures and seam separation after storms and can replace individual panels.
A windstorm just dropped a tree on my roof in Sammamish. How fast can you respond?
We offer free storm and wind damage inspections and prioritize active leaks and structural damage. Call (425) 648-6332 and we will schedule a visit as soon as possible, often the same day or next day depending on storm volume. We can tarp and stabilize the roof before permanent repairs.
What does a typical metal roof replacement cost in Sammamish?
Most full replacements fall between $9 and $14 per square foot installed, depending on material and complexity. Standing seam runs higher, starting at $10 per square foot, and a complex roofline or steep pitch adds labor. We give you a written estimate after a free on-site assessment.
Do I need a permit for a metal roof in Sammamish?
Roofing permits are commonly required for a full replacement or re-roof, and requirements vary by jurisdiction. We recommend checking with the City of Sammamish website for current rules, and we can help you navigate the permit process as part of your project.
My HOA requires approval for roof color and style. Can you help with that in Sammamish?
Yes. Many Sammamish neighborhoods have design review, and we can provide product specifications, color samples, and panel profiles for your HOA submission. We also respect property line setbacks and can discuss placement with you before installation.
Are you insured for work at my Sammamish home?
Yes, we are fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before work begins.
What maintenance does a metal roof need in Sammamish's climate?
Plan on an annual inspection, especially after fall needle drop and winter storms. We check fasteners, seams, flashing, and gutters, and remove debris from valleys. Catching a loose fastener or small leak early prevents bigger damage from the long damp season.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Seattle

All your work handled by qualified professionals in Seattle

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Seattle

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Seattle · Response within 24h · No commitment · ☎ (425) 648-6332

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Seattle ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm