Serving the Seattle area  ·  (425) 648-6332  ·  Open Mon-Sun 7am-7pm
📞 (425) 648-6332 Free Quote

Metal Roofing in Bellevue, WA (98004) · Local Professionals

Seattle Metal Roofing · Fast response in Bellevue and the Seattle area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (425) 648-6332
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Bellevue's mix of 1950s ramblers, view homes on the hills above Lake Washington, and new infill townhomes means one roof type keeps coming up: metal. Whether you're in Clyde Hill, Bridle Trails, or a 98004 Craftsman near Downtown Park, the tall firs and wet winters put your roof through a lot.

Homeowners in Bellevue call Seattle Metal Roofing because we've been solving Puget Sound roofing problems since 2009. We know the moss that grows on north-facing slopes, the wind that funnels through the 405 corridor, and the way a failed fastener can turn into a ceiling stain after one atmospheric river. We're a Metal Roofing Alliance member, fully insured, and we treat your property like it's in our own neighborhood.

Metal Roofing in Bellevue (98004)

Bellevue is built on steep hills and glacial till, and that shapes every roofing job. On properties near Cougar Mountain or the slopes above Lake Sammamish, roof pitch and drainage are critical; water moves fast and finds every gap. In established neighborhoods like Medina or Hunts Point, lots are generous but often heavily landscaped, with mature Douglas firs and western red cedars that drop needles and shade the roof, which is exactly where moss and algae take hold. Newer construction in areas like West Bellevue or the Spring District often features standing seam metal, and we're called to repair or replace those systems when fasteners back out or panels lift in a windstorm.

Our team has served Bellevue and the greater Seattle area since 2009. We've worked on everything from 1920s bungalows near Old Bellevue to contemporary view homes in Clyde Hill, and we understand the local building department's requirements and the design review that can apply in certain neighborhoods.

Our services in Bellevue

How a Job Works in Bellevue

Step 1: You call (425) 648-6332 or request a free estimate online. We schedule an on-site assessment, walk the roof, check flashings, fasteners, and drainage, and take photos. We'll explain what we find and give you a written estimate, no pressure.

Step 2: Once you approve, we pull the required permits through the City of Bellevue and schedule the work. Tight lots and steep driveways are common here, so we plan material delivery and staging carefully to avoid blocking neighbors. If your home is in an HOA or a design review area, we help coordinate color and profile approvals before ordering panels.

Step 3: After installation or repair, we clean the site thoroughly, including magnetic sweeps for nails, and walk the roof with you. We don't leave until you're satisfied and we've documented the work for your records.

Pricing in Bellevue reflects the complexity of local roofs. Metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. A retrofit over existing shingles starts at $7, though code limits how many layers you can cover. Repairs and leak fixes start at $450, screw replacement at $750, and flashing or chimney work at $600. Stone-coated steel and metal shingles start at $9, copper and specialty metals at $20. Coating and painting start at $2.50. The final number depends on roof size, pitch, access, condition, and urgency. Call (425) 648-6332 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Bellevue and nearby areas.

My Bellevue home is surrounded by tall firs. Will a metal roof handle the needle drop and moss?
Yes, and it's actually a better choice than asphalt in that setting. Metal sheds needles and debris more easily, and we can install snow guards and proper flashing to keep debris from collecting. We also recommend a maintenance plan that includes clearing the valleys and gutters, especially under cedar and fir trees common in Bridle Trails and Cougar Mountain.
A windstorm just lifted panels on my roof in Bellevue. How fast can you respond?
We prioritize storm and wind damage calls. Call (425) 648-6332 and we'll schedule an inspection, often same or next day depending on volume. We can tarp or secure the roof to prevent further water intrusion and provide a detailed estimate for insurance documentation.
What does a typical metal roof replacement cost in Bellevue?
For a standard 2,000 square foot roof, replacement with standing seam often runs in the range of $20,000 to $30,000, depending on pitch, access, and whether we need to remove existing layers. Corrugated panel can be less, copper more. Every roof is different, so we provide a free on-site estimate with a firm price.
Do I need a permit for a metal roof in Bellevue?
In most cases, yes, a roofing permit is required for a full replacement or re-roof. Requirements vary, so we always check with the City of Bellevue before starting. You can also visit the City of Bellevue website for general information. We handle the permit application and inspections as part of our service.
My HOA requires a specific roof color. Can you help with approval?
Absolutely. Many Bellevue HOAs and design review boards have guidelines for panel profile and color. We provide product samples, manufacturer specs, and color chips for your application, and we can attend a meeting if needed. We won't order materials until you have written approval.
Are you insured for work on my Bellevue property?
Yes, we are fully insured with general liability and workers' compensation coverage. We're happy to provide a certificate of insurance before work begins. Our crews are trained and covered, so you're protected.
What maintenance does a metal roof need in Bellevue's climate?
We recommend an annual inspection, especially after storm season. Check for loose fasteners, debris in valleys and gutters, and any signs of moss or algae. A coating can extend the life of older panels. We offer maintenance plans and free estimates for any concerns.

Nearby service areas

📍 Seattle 98101📍 Redmond 98052📍 Kirkland 98033📍 Renton 98057
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Seattle

All your work handled by qualified professionals in Seattle

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Seattle

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Kent

“Needed a new red metal roof on our grange hall out past Kent and these guys knocked it out in about three days. The red panels look sharp and the crew even swept the gravel driveway before they left. Way easier to deal with than I expected.”

Commercial & Agricultural Metal Roofing
Jennifer M.
⭐⭐⭐⭐⭐
JM
Jennifer M.
Bellevue

“We had a small copper roof put over our front porch and the craftsmanship is honestly beautiful. The seams are tight and even, and it already has that nice patina starting. Worth every penny.”

Copper & Specialty Metal Roofing
Scott H.
⭐⭐⭐⭐
SH
Scott H.
Redmond

“They installed a standing seam roof on our cabin near the woods and it's held up great through wind and rain. The crew was respectful and cleaned up all the old materials. My only gripe is they started a day later than scheduled, but the work itself was solid.”

Metal Roof Installation
Mike J.
⭐⭐⭐⭐⭐
MJ
Mike J.
Kirkland

“Got a ribbed metal panel roof on our back porch and it came out exactly how I pictured it. Fast, tidy, and the price was fair. Would call them again in a heartbeat.”

Corrugated & Ribbed Panel Roofing
Sarah W.
⭐⭐⭐⭐⭐
SW
Sarah W.
Renton

“Our old roof was leaking in two spots and we finally pulled the trigger on a full metal replacement. The crew of four had it done in under a week and walked me through every step. No more buckets in the hallway, which is a huge relief.”

Metal Roof Replacement
Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Shoreline

“Professional from the first estimate to the final walkthrough. The standing seam panels are perfectly aligned and the flashing around the chimney is flawless.”

Standing Seam Metal Roofing
Amanda K.
⭐⭐⭐⭐⭐
AK
Amanda K.
Seattle

“We went with the retrofit over our existing shingles on this modern-style house and I was skeptical at first, but the result is fantastic. Clean lines, no mess left behind, and it actually modernized the whole look. Really impressed.”

Metal Roof Over Shingles (Retrofit)
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Federal Way

“Had a leak near the skylight on our Tudor-style home and they tracked it down and fixed the flashing the same week I called. Quick, honest, and didn't try to upsell me a whole new roof. Grateful for that.”

Metal Roof Leak Repair
Free Quote

Get Your Free Quote

Metal Roofing in Seattle · Response within 24h · No commitment · ☎ (425) 648-6332

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Seattle ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm